Fire Protection System Design: Prevent Critical Failures Before They Happen!
From sprinkler layout engineering to pump and pressure calculations, Lumeshield provides a fire protection system design services that is fully optimized, compliant, and operationally safe.
Design Errors in Fire Protection Systems Can Put Your Business at Risk
- Inaccurate system design can result in system failure during critical events.
- Design flaws can lead to costly rework and significant project delays.
- Non-compliance with standards may trigger regulatory findings and insurance claim denials.
- Equipment, facilities, and personnel safety are at risk when the system is not engineered to perform reliably.
Partner with a Specialized Fire Safety Consultancy
Here’s how we engineer your fire protection system:
Fire Pump System Design
We calculate pump capacity, pressure, and layout arrangement according to NFPA, SNI, FM Global, or other applicable standards to ensure a stable and reliable water supply.
Hydrant System Design
We determine hydrant spacing, flow demand, and supply capacity refer to the standard. Using hydraulic simulation software, we verify pipe sizing and pump capacity to ensure minimum pressure at the farthest hydrant.
Sprinkler System Design
We classify hazards, select the correct K-factors, and perform hydraulic calculations that refer to NFPA, SNI, FM Data Sheets, or other relevant standards.
Water Spray System Design
We classify hazards, calculate discharge needs, select K-factors, and run hydraulic simulations to protect equipment such as transformers and conveyors, or any other process equipment.
Foam System Design
We classify the flammable-liquid hazard, calculate foam requirements, and perform hydraulic simulations for tank farms, process lines, and storage areas.
Gas Suppression System Design
For areas where water-based systems cannot be used, we design gas suppression systems. We confirm hazard classification, select the appropriate agent, calculate the required agent quantity, and perform flow calculation.
Fire Alarm System Design
We plan zoning, detector types, wiring routes, and control logic to ensure fast and reliable detection and notification.
Why Work With Us?
Comprehensive NFPA Compliant Design
A complete design package aligned with NFPA, FM Global, SNI, and relevant standards without compliance issues.
Reduced Installation Risk
Accurate engineering minimizes construction and installation errors, preventing rework and unnecessary cost escalation.
Audits and Insurance Claims Support
Comprehensive documentation streamlines regulatory audits and insurance claim preparation.
Reliable System Performance in Emergencies
Every component is engineered to ensure the system performs when it matters most to protect your facility and personnel.
Collaboration & Project Execution Stages
Consultation & Planning
After identifying the business problem, we recommend solutions based on your needs and then gather relevant data for a proposal offering.
Quotation & Proposal
We offer a collaboration proposal containing cost estimation, scope of work, project duration, methods, and other supporting data for the project. We discuss its suitability to your needs; if not, it will be revised.
Contract Signing
If the proposal meets your requirements, we will send contract documents to start our collaboration.
Execution
We start working on the design document, assessment, or other services according to the proposal we agreed.
Project Discussion
During the process, we will discuss more about the project, ensuring the details of the work for the best results to your business needs.
Final Presentation
We present the results of our work in the final presentation.
Our Services Cover All Regions in Indonesia
Business Areas We Serve
Oil & Gas
Consumer Products
Construction Industry
Telecom
Manufacturing
Energy Infrastructure
Data Center
Banking
Commercial Building
Residential Building
Government Building
Frequently Asked Questions
How do I know if my facility needs fire safety system improvements?
Fire safety system improvements are necessary to prevent fires that could potentially damage assets and threaten employee safety. If your business experiences changes in building function, production scale, or even experiences electrical fires, you need to upgrade your system immediately.
How often should I check the fire safety equipment and systems in my facility?
Fire safety equipment and systems should be inspected monthly, quarterly, and annually, depending on the system installed. With our Fire Safety Management System, you’ll receive standardized fire safety system maintenance procedures.
What are services provided by Lumeshield?
We have 4 services, they are Fire Protection System Design, Fire Risk Assessment, Fire Protection System Evaluation, and EPC Support.
Are fire safety system services from Lumeshield suitable for all industries?
We serve facilities that require fire safety, such as businesses with warehouses, production or product storage facilities, and buildings at risk of fire.
How to order Lumeshield services?
Contact us via email or WhatsApp and tell us your problem. If you don’t have technical documentation, such as drawings, we’ll make a visit to your facility. Then, we will recommend a solution to your issues and send a proposal offering. If it meets your needs, we will proceed with a contract signing to begin our collaboration.
Is Lumeshield able to provide solutions for unique client specifications?
Indeed, we prioritize communication so that our work results can have an impact and perfectly accommodate the client’s business needs.
Is there a guarantee if Lumeshield fails to proceed the project based on initial plan?
Changes frequently arise during the implementation phase, which can impact the final outcome from the original plan. Therefore, we also provide EPC Support, where we monitor the implementation process to maintain system performance.
How does Lumeshield design planning process work?
We will first identify potential hazards throughout your area, then recommend a system that best suits your facility’s conditions.
How does the payment system work with Lumeshield?
After signing the contract agreement, you will make a down payment. Payments will then be made in installments based on the progress of the work. Final payment will be made after all documents have been approved and the handover report, signed by both parties, has been submitted.
How long does it take to complete a project with Lumeshield?
The project duration will depend heavily on the number of sites, their size, hazard classification, and system integration. We always include project duration in our proposal offering so you can estimate the time required to complete the project with us.